Dell PowerVault ML6000 - Manual (Page 61)

Dell PowerVault ML6000 SMI-S Reference Guide 57
Table 46 Required Container Level Instances of ConfigurationCapacity
Note: Total RAW capacity is computed as “number of slots” multiplied by “tape size”. “Tape size” is the size
of the tape type with maximum capacity. Example, If the library supports LTO-1 and LTO-2, tape size would
be the RAW capacity of the LTO-2 tape.
Table 47 Required Properties for SystemDevice
Property Instance 1 Instance 2 Instance 3
Name[key] “Tape Library Maximum
Slots” “Tape Library Number
of Tapes” “Tape Library Number
of Tape Drives”
ObjectType[key] StorageMediaLocation
Slots ( 8 ) Other (0) MediaAccessDevices (
Drives ) (7)
MaximumCapacity Depends on library
configuration Same as instance 1 Depends on library
configuration
OtherTypeDescription “Estimated number of
maximum slots” “Estimated number of
maximum tapes” “Estimated number of
maximum tape drives”
Property Instance 4 Instance 5 Instance 6
Name[key] “Tape Library Total
RAW Capacity” “Tape Library Total
RAW Free Capacity” “Tape Library Total
RAW Used Capacity”
ObjectType[key] Other (0) Other (0) Other (0)
MaximumCapacity Example: 400000 in
GB Example: 400000 in
GB Example: 0 in GB
OtherTypeDescription “Estimated total raw
capacity” “Estimated total raw
Free capacity” “Estimated total raw
used capacity”
Property Type Description/Notes
GroupComponent REF Parent system in the association.
PartComponent REF Logical device that is component of the
association product.