Dell PowerVault ML6000 - Manual (Page 16)

12 Service Discovery and CIM Indications
Discovering the CIM Server
When you discover the CIM server that is embedded within your library, you not only determine its location
within your SAN, but you also determine which services it supports (as defined by the server’s profiles).
Discovering CIM servers provides information about the physical and logical entities within your SAN. This
information changes dynamically as SAN entities are added, moved, or removed. This discovery process
also helps you discover object classes and related association classes, as well as return status codes that
are provided by servers in the managed environment.
You can discover the CIM server in your library by using the following:
• IP address and hostname of the library
• SLP
SLP supports the WBEM SLP template, v1.0.0. You can use the following profiles and subprofiles
for discovery and performance monitoring:
• Storage Library Profile ( Storage Library Profile, Version 1.2 )
• Library Capacity Subprofile
• Software Subprofile
• Location Subprofile
• Access Points Subprofile
• Limited Access Port Subprofile
• Physical Package Subprofile
• Fibre Channel Target Port Subprofile
• Element Counting Subprofile
• Various methods defined by CIM
Use the following methods, which are intrinsic methods defined by CIM, to retrieve information
about your library.
The location of the CIM server, which is identified by the library’s IP address, is the target of these
methods. These methods are supported for the CIM protocol only and cannot be entered as
commands.