Dell 7130cdn Color Laser Printer - Manual (Page 74)

Printer Commands
Dell 7130cdn Professional Color Printer
System Administrator Guide 74
@PJL
XJAHOSTNAME=“hostname” Roman-8 characters
1-255 Sets the file name for Job Accounting.
@PJL XJAJOBNAME=“jobname” Roman-8 characters
1-255 Sets the file name for Job Accounting.
@PJL
XJAUSERNAME=“username” Roman-8 characters
1-255 Sets the file name for Job Accounting.
@PJL XJOBPASSWORD=value 4-digits Assigns the job password used by
Secure Print.
@PJL XPERSONALJOB n/a Starts a Personal Print job.
@PJL XPROOFJOB n/a Starts a Proof Print job.
@PJL XSAVEDJOB n/a Starts a Saved Print job.
@PJL XSECUREJOB n/a Starts a Secure Print job.
@PJL XIGNOREFF=value ON, OFF Ignores FormFeed commands when
printing PCL blank pages.
@PJL
XLINETERMINATION=value ON, OFF Terminates a line.
@PJL XMBFSIZE=value ANY or any supported
media size, such as
LETTER, STATEMENT,
and EXECUTIVE Sets the media size for Tray 1.
@PJL XMEDIASOURCE=value ANY, TRAYn Sets the media source.
@PJL XMEDIATYPE=value ANY or any supported
media type, such as
PAPER and LABEL Sets the media type.
@PJL XPCLTRAYSWITCH=value ON, OFF Switches trays when a tray becomes
empty. If AutoSelect is chosen as the
paper source (tray) in PCL, then tray
switching is always active, regardless
of the value. When the current tray
becomes empty, the printer attempts to
switch to another tray containing the
same size and type of paper. This
command only takes effect when a
specific tray, such as Tray 2, is
selected in the job. When this
command is ON, tray switching still
occurs when the tray becomes empty.
When this command is OFF, no
switching occurs and the user is
prompted to load paper.
PJL Command Values Description