Dell XPS 710 - Manual (Page 78)

System Setup: Dell XPS 700 Service Manual
syssetup.htm[4/11/2014 11:32:17 AM]
NOTE: When the system password field is
locked, you can no longer disable
password security by pressing
when the computer starts.
Execute Disable
(On default)
Enables or disables Execute Disable
Memory Protection technology.
Off — Execute Disable Memory
Protection technology is disabled.
On — Execute Disable Memory
Protection technology is enabled.
Power Management
AC Recovery
(Off default)
Specifies how the computer will behave
when AC power is restored after an AC
power loss.
Off — The system stays off after
AC power is restored.
On — The system powers on after
AC power is restored.
Last — The system returns to the
previous state after AC power is
restored.
Auto Power On
(Off default)
Disables or selects when to automatically
turn on the computer.
Off — Do not use the Auto Power
Time.
Everyday — Turn the computer on
every day at the time set in Auto
Power Time.
Weekdays — Turn the computer
on Monday through Friday at the
time set in Auto Power Time.
NOTE: This feature does not work if you
turn off your computer using a power
strip or surge protector.
Auto Power Time Specifies the time to automatically turn on
the computer.
Change the time to automatically turn on
the computer by pressing the up- or
down-arrow key to increase or decrease
the numbers, or type the numbers in the
appropriate time field.
NOTE: This feature does not work if you
turn off your computer using a power
strip or surge protector.
Suspend Mode
(S3 default)
Specifies the power management suspend
mode.
S1 — The computer resumes more
quickly from sleep mode.
S3 — The computer conserves
more power when not in use
(system memory remains active).