Dell XPS 710 - Manual (Page 4)

About Your XPS Computer: Dell XPS 700 Service Manual
about1.htm[4/11/2014 11:32:06 AM]
6 USB 2.0
connectors
(2)
Use the front USB connectors for devices that you connect occasionally, such as
flash memory keys, cameras, or bootable USB devices. For more information
on bootable USB devices see Boot Sequence .
It is recommended that you use the back USB connectors for devices that
typically remain connected, such as printers and keyboards.
7 IEEE 1394
connector
Use the IEEE 1394 connector for high-speed data devices such as digital video
cameras and external storage devices.
Back View
1 power
connector
Insert the power cable. The appearance of this connector may differ from
what is pictured.
2 back panel
LEDs (2)
Multi-colored lights provide illumination for the I/O panel on the back of the
computer.
NOTE: The color of the back panel LEDs can be adjusted in system setup
(see System Setup ).
3 back I/O
connectors
Plug serial, USB, and other devices into the appropriate connectors (see
Back I/O Connectors ).
4 card slots Access connectors for any installed PCI or PCI Express cards.
NOTE: Some connector slots support full-length cards.
Back I/O Connectors