beautypg.com

Charging the battery, Removing a battery, You can – Dell Latitude X1 User Manual

Page 10: Check the battery charge, Before you, Insert the battery, Battery, Charge is low, Microsoft ® windows ® power meter, Charge gauge

background image

Microsoft® Windows® Power Meter

The Windows Power Meter indicates the remaining battery charge. To check the Power Meter, double-click the

icon on the taskbar. For more information

about the Power Meter tab, see "

Power Management

."

If the computer is connected to an electrical outlet, a

icon appears.

 

Charge Gauge

Before you

insert a battery

, press the status button on the battery charge gauge to illuminate the charge-level lights. Each light represents approximately 20

percent of the total battery charge. For example, if the battery has 80 percent of its charge remaining, four of the lights are on. If no lights appear, the battery
has no charge.

 

Low-Battery Warning

A pop-up window warns you when the battery charge is approximately 90 percent depleted. For more information about low-battery alarms, see "

Power

Management

."

 

Charging the Battery

The AC adapter charges a completely discharged battery to 80% in about 1 hour and to 100% in approximately 2 hours when the computer is turned off.

When you connect the computer to an electrical outlet or install a battery while the computer is connected to an electrical outlet, the computer checks the
battery charge and temperature. If necessary, the AC adapter then charges the battery and maintains the battery charge.

If the battery is hot from being used in your computer or being in a hot environment, the battery may not charge when you connect the computer to an
electrical outlet.

The battery is too hot to start charging if the

light flashes alternately green and orange. Disconnect the computer from the electrical outlet and allow the

computer and the battery to cool to room temperature. Then connect the computer to an electrical outlet to continue charging the battery.

For more information about resolving problems with a battery, see "

Power Problems

."

 

Removing a Battery

 

1.

Ensure that the computer is turned off or connected to an electrical outlet.

 

2.

Slide and hold the battery-bay latch releases on the bottom of the computer, and then remove the battery from the bay.

NOTICE:

To avoid losing or corrupting data, save your work immediately after a low-battery warning. Then connect the computer to an electrical outlet.

If the battery runs completely out of power, hibernate mode begins automatically.

NOTE:

With Dell™ ExpressCharge™, when the computer is turned off, the AC adapter charges a completely discharged battery to 80% in about 1 hour 

and to 100% in approximately 2 hours. Charge time is longer with the computer turned on. You can leave the battery in the computer for as long as you
like. The battery's internal circuitry prevents the battery from overcharging.

CAUTION:

Before performing these procedures, disconnect the modem from the telephone wall jack.

NOTICE:

If you choose to replace the battery with the computer in standby mode, you have up to 1 minute to complete the battery replacement before

the computer shuts down and loses any unsaved data.