Dell Dimension 2350 User Manual
Page 58
58
Advanced Troubleshooting
www
.dell.com | support.dell.com
2
If a problem is encountered during a test, a message displaying the error code and a
description of the problem appear. Write down the error code and problem description
and follow the instructions on the screen.
If you cannot resolve the error condition, contact Dell (see page 100).
3
If you run a test from the Custom Test or Symptom Tree option, click the applicable
tab described in the following table for more information.
4
When the tests are completed, if you are running the Dell Diagnostics from the
ResourceCD, remove the CD.
5
Close the test screen to return to the Main Menu screen. To exit the Dell Diagnostics
and restart the computer, close the Main Menu screen.
Option
Function
Express Test
Performs a quick test of devices. This test typically takes 10 to 20 minutes and
requires no interaction on your part. Run Express Test first to increase the
possibility of tracing the problem quickly.
Extended Test
Performs a thorough check of devices. This test typically takes an hour or more
and requires you to answer questions periodically.
Custom Test
Tests a specific device. You can customize the tests you want to run.
Symptom Tree
Lists the most common symptoms encountered and allows you to select a test
based on the symptom of the problem you are having.
Tab
Function
Results
Displays the results of the test and any error conditions encountered.
Errors
Displays error conditions encountered, error codes, and problem
description.
Help
Describes the test and may indicate requirements for running the test.
Configuration
Displays your hardware configuration for the selected device.
The Dell Diagnostics obtains your configuration information for all
devices from the system setup program, memory, and various internal tests
and displays it in the device list in the left pane of the screen. The device
list may not display the names of all the components installed on your
computer or all devices attached to your computer.
Parameters
Allows you to customize the test by changing the test settings.