Dell Inspiron Desktop (3847, Early 2013) - Manual (Page 43)

Removing the Processor Fan and Heat Sink Assembly | 43
Procedure
1 Disconnect the processor-fan cable from the system board connector (FNCPU1).
See "System-Board Components" on page 11.
2 Using a phillips screwdriver loosen the captive screws that secure the processor fan
and heat-sink assembly to the system board.
3 Lift the processor fan and heat-sink assembly out of the computer.
1 processor fan and heat-sink assembly 2 captive screws (4)
3 processor-fan cable
3
2
1
book.book Page 43 Tuesday, November 12, 2013 1:54 PM