Dell Inspiron Desktop (3847, Early 2013) - Manual (Page 14)

14 | Removing the Memory Module(s)
Removing the Memory Module(s)
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 7. After working inside your computer, follow the instructions in
"After Working Inside Your Computer" on page 9. For more safety best practices,
see the Regulatory Compliance home page at dell.com/regulatory_compliance.
Prerequisites
Remove the computer cover. See "Removing the Computer Cover" on page 12.
Procedure
1 Locate the memory-module connector on the system board. See "System-Board
Components" on page 11.
2 Press out the securing clip at each end of the memory-module connector.
NOTE: If the memory module is difficult to remove, gently ease the memory
module back and forth to remove it from the connector.
3 Grasp the memory module and pull it upward.
1 securing clips (2) 2 memory module
3 memory-module connector
2
3
1
book.book Page 14 Tuesday, November 12, 2013 1:54 PM