Removing the wireless mini-card, Prerequisites, Procedure – Dell Inspiron Desktop (3847, Early 2013) User Manual
Page 21
Removing
the
Wireless
Mini-Card |
21
Removing the Wireless Mini-Card
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 7. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 9. For additional safety best practices,
see the Regulatory Compliance home page at dell.com/regulatory_compliance.
Prerequisites
Remove the computer cover. See "Removing the Computer Cover" on page 12.
Procedure
1
Locate the mini-card slot (MINI1) on the system board. See "System-Board
Components" on page 11.
2
Disconnect the antenna cables from the wireless mini-card.
3
Remove the screw that secures the wireless mini-card to the system board.
4
Slide and remove the wireless mini-card from the mini-card connector.
1
screw
2
antenna cables (2)
3
wireless mini-card
4
mini-card slot (MINI1)
2
1
3
4
book.book Page 21 Tuesday, November 12, 2013 1:54 PM