Replacing the i/o board – Dell Inspiron Mini 10v (1018, Mid 2010) User Manual
Page 23
Replacing the I/O Board
1.
Follow the instructions in
Before You Begin
.
2.
Align the connectors on the I/O board with the slots on the computer base.
3.
Connect the I/O board cable to the connector on the I/O board.
4.
Place the I/O board grounding cable over the screw hole and replace the grounding screw.
5.
Replace the support brackets (see
Replacing the Support Brackets
).
6.
Replace the display assembly (see
Replacing the Display Assembly
).
7.
Replace the middle cover (see
Replacing the Middle Cover
).
8.
Replace the memory module (see
Replacing the Memory Module
).
9.
Replace the palm rest assembly (see
Replacing the Palm Rest Assembly
).
10.
Replace the hard-drive assembly (follow the instructions from
step 5
to
step 7
in
Replacing the Hard Drive
).
11.
Replace the keyboard (see
Replacing the Keyboard
).
12.
Replace the battery (see
Replacing the Battery
).
Back to Contents Page
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.