Dell Inspiron Mini 10v (1018, Mid 2010) - Manual (Page 15)

Replacing the Display Panel
1. Follow the instructions in Before You Begin .
2. Place the display panel over the display back cover.
3. Connect the camera cable to the connector on the camera module.
4. Replace the four screws that secure the display panel to the display back cover.
5. Replace the display bezel (see Replacing the Display Bezel ).
6. Replace the display assembly (see Replacing the Display Assembly ).
Display Cable
Removing the Display Cable
1. Follow the instructions in Before You Begin .
2. Remove the display assembly (see Removing the Display Assembly ).
3. Remove the display bezel (see Removing the Display Bezel ).
4. Remove the display panel (see Removing the Display Panel ).
5. Turn the display panel over and place it on a clean surface.
6. Pull the pull-tab to disconnect the display cable from the connector on the display panel.
1 screws (4) 2 display panel
3 camera cable connector
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.