Dell 1100 Laser Mono Printer - Manual (Page 65)

Troubleshooting
Clearing Jams in the Paper Tray
Understanding the Operator Panel LEDs
Troubleshooting Checklist
Solving General Printing Problems
Solving Print Quality Problems
Clearing Jams in the Paper Tray
Occasionally, paper jams during a print job. Some causes could be:
The tray is overfilled.
The front cover or top cover has been opened during a print job.
The adjustable paper guides are not properly positioned.
Paper that does not meet paper specifications has been used. See "Paper Specifications" .
Paper that is outside of the supported size range has been used. See "Paper Specifications" .
If a paper jam occurs, on the operator panel lights red. Find and remove the jammed paper. If you
cannot see it, look inside the printer.
To avoid tearing the paper, pull the jammed paper out gently and slowly. Follow the steps below to clear the
jam.
Paper Feed Jam
Remove any misfed paper by pulling it out by its visible edge. Make sure that all of the paper is
properly aligned in the tray. 1.