Dell POWEREDGE M1000E - Manual (Page 38)

26 Dell M8428-k Hardware Reference Manual
53-1001980-01
Removing and replacing the converged network switch
3
FIGURE 5 Removing a cable and transceiver from a port
5. Refer to the Hardware Owner’s Manual for the Blade Server Enclosure to remove and replace
the switch module from the enclosure.
.
ATTENTION
If you are not replacing the converged network switch, use a filler panel to fill the empty slot to
maintain proper air flow. Do not leave the slot empty.
SFP
Bale
3 1
Cable
Release
2
SFP
4