Dell POWEREDGE M905 - Manual (Page 61)

About Your System
61
Brocade M4424 SAN I/O Module
The Brocade M4424 SAN I/O module includes eight external autosensing
Fibre Channel ports (four ports are enabled in the standard configuration and
four additional ports may be enabled as an optional upgrade), 16 internal
ports, and one serial port with an RJ-45 connector. The external Fibre
Channel ports operate at 1 Gb/sec, 2 Gb/sec, or 4 Gb/sec. The Fibre Channel
switch module is hot-pluggable, and may be installed in Fabric B or Fabric C.
For general information on installing this module, see "I/O Modules" on
page 166.
Fibre Channel Port LEDs with Qlogic Mezzanine Card Installed
Green off, amber
off Power off
Green off, amber
on Online, 1 Gb or 2 Gb link
Green on, amber
off Online, 4Gb link
Green off, amber
flashing I/O activity, 1 Gb or 2 Gb
Green flashing,
amber off I/O activity, 4 Gb
Green flashing
and amber
flashing at same
time Loss of synchronization
Green flashing
and amber
flashing at
different intervals Firmware error
Off/amber
flashing (twice
per second) Connection has lost synchronization.
Table 1-15. Fibre Channel Pass-through Indicators (continued)
Indicator Type Pattern Description