Dell W5300 Workgroup Laser Printer - Manual (Page 137)

Network ,
A network interface is the active
communication link, where
represents the active
communication link and
represents the channel.
No Jobs Found.
Retry?
The four-digit personal
identification number (PIN) you
entered is not associated with any
confidential print job. Press Go to enter another PIN.
Press Stop to clear the PIN entry
prompt.
Not Ready
The printer is not ready to receive
or process data. Someone
pressed Stop to take the printer
offline. Press Go to make the printer ready to
receive jobs.
Performing Self
Test
The printer is running the series
of start-up tests it performs after
it is turned on. Wait for the message to clear.
Power Saver
The printer is ready to receive
and process data. It is reducing
its electricity consumption while
idle. If the printer remains
inactive for the period of time
specified in the Power Saver
menu item (20 minutes is the
factory default), the Power Saver
message replaces the Ready
message on the display. Send a job to print.
Press Go to quickly warm the printer
to normal operating temperature
and display the Ready message.
Printing Font List
The printer is processing or
printing a list of all available fonts
for the specified printer language. Wait for the message to clear.
See also: Print Fonts
Printing Menu
Settings
The printer is processing or
printing the menu settings page. Wait for the message to clear.
See also: Print Menus ; Printing a menu
settings page
Prog System Code
DO NOT POWER
OFF
The printer is programming new
system code. Wait for the message to clear and the
printer to reset.
Do not turn the printer off while this
message is displayed.
Queuing and
Deleting Jobs
The printer is deleting one or
more held jobs and sending one
or more jobs to print. Wait for the message to clear.
See also: Using the Print and Hold function