Dell W5300 Workgroup Laser Printer - Manual (Page 135)

Flushing Buffer
The printer is flushing corrupted
print data and discarding the
current print job. Wait for the message to clear.
Held Jobs may be
lost
The printer memory is too full to
continue processing print jobs. Press Go to clear the message and
continue printing. The printer frees
memory by deleting the oldest held
job and continues deleting held jobs
until there is enough printer memory
to process the job.
Press Stop to clear the message
without deleting any held jobs. The
current job may not print correctly.
Press Menu to open the Job Menu
and cancel the current job.
To avoid this error in the future:
Delete fonts, macros, and
other data stored in printer
memory.
Install more printer memory.
The messages 37 Insufficient
Memory
and Held Jobs may be
lost alternate on the display.
See also: Using the Print and Hold
function ; 37 Insufficient Memory
Insert Tray
The specified tray is either
missing or not fully inserted into
the printer. Insert the specified tray completely into
the printer.
See also: Loading print media in standard
and optional trays
Install
or Cancel Job
The printer is requesting that a
specified device be installed so it
can print a job.
is one of the following:
Tray x
Duplex
Env Feeder
Turn the printer off, install the
specified device, and restart the
printer.
Press Menu to open the Job Menu
and cancel the current job.
Invalid Network
Code
The code in an internal print
server is not valid. The printer
cannot receive and process jobs
until valid code is programmed
into the internal print server. Download valid code to the printer internal
print server.
NOTE: You can download network code
while this message is displayed.
Invalid Standard
Network Code
Load Manual
A request for a manual feed job
has been sent to the printer. The Load a sheet of the paper specified
in the second line of the display in