beautypg.com

42 b. error messages and remedies – Cleveland Range The MINI OES-6.08 User Manual

Page 48

background image

42

B. Error Messages and Remedies

Error

Message on display

Possible cause

Remedy

Water valve closed

Open water valve

Solenoid valve dirt filter contaminated

Remove and clean filter

E01

Not enough water

Solenoid valve fault

Call for Service

E02

Connection area temperature
too high

Connection area ventilation fault

Air supply blocked

Allow MINI to cool, or continue
cooking at a lower oven
temperature, and call Service

E04

Connection area fan
malfunction

Auxiliary fan fault

Call for Service

Excess oven temperature

Call for Service

E11/E32

Excess temperature in oven
or oven sensor failure

Oven sensor fault

Call for Service

Water tap closed

Open water tap

Excess temperature in condenser via hot
water connection

Connect appliance to cold water,
restart

Solenoid valve dirt filter contaminated

Remove and clean filter

Solenoid valve fault

Call for Service

E15/E36

Excess temperature of
condenser or condenser
sensor failure

Condenser sensor fault

Call for Service

E33

Core Temperature Sensor
faulty

Core Temperature Sensor faulty

Set cooking mode with time, and
call Service

E29

Ground connection of sensor

Temperature sensor fault

Call for Service

E80/E95/E96

ID error / software error /
connection fault

Control fault

Call for Service

E82

Working parameter error

Problems during switch between C and F

Check settings in Cookbook or
check °C/F in settings


C. Operating Irregularities not having Error Messages

Error

Possible cause

Remedy

Fan guard not correctly locked

Lock fan guard correctly

Nominal oven temperature too high

Select lower temperature and increase

cooking time

Not pre-heated

Always pre-heat MINIs

Bypass pipe greasy

Clean bypass

Uneven browning

Incorrect accessories, containers

Use suitable accessories and containers

Control elements not illuminated and do

not react when switched on

No power connection, external failsafe

triggered

Call for Service

Appliance does not react to information

entered

Software has hung itself up

Hold down the ON/OFF switch for 5

seconds or disconnect appliance for 5

seconds

Appliance cannot be switched on or off

ON/OFF has been locked for 3 seconds

Try again after 3 seconds

Oven is not lit inside

Oven light faulty

Call for Service

Steam measuring line blocked

Clean steam measurement line; see

“Daily servicing and maintenance”

Water sprays from air outlet when door is

closed

Appliance drain blocked

Clean drain