Cleveland Range The MINI OES-6.08 - Manual (Page 44)

38
CHAPTER 10 MINI SETUP
NOTES:
The various setup options are described in detail below.
You can exit the menu at any time by pressing the Start/Stop key.
To use the Setup Menu:
1. Press the Smart Key.
2. Various options appear in the display.
3. Use the Selector Dial to select “Setup”
.
4. Confirm by pressing the Smart Key.
5. Confirm “yes” with the Smart Key.
6. Various options appear in the display.
A. Signal Tone
To select the Signal Tone from the Setup Menu:
1. Select “Signal Tone” with the Selector Dial.
2. Confirm by pressing the Smart Key.
3. The display shows the selection of available Signal Tones.
4. To choose a Signal Tone, use the Selector Dial.
5. Pause on a Signal Tone to hear it sound.
6. Confirm the selection by pressing the Smart Key.
B. Volume
To select a Volume Level from the Setup Menu:
• When setting the volume, consider the noise level in your kitchen.
1. Select “Volume” with the Selector Dial.
2. Confirm by pressing the Smart Key.
3. The display shows the volume options and a Signal Tone sounds.
4. Use the Selector Dial to select the desired volume.
5. Confirm the setting by pressing the Smart Key.
C. Time
To set the Time from the “Setup” menu:
• If the power is off for more than three days, the time must be re-entered
1. Select “Time” with the Selector Dial.
2. Confirm by pressing the Smart Key.
3. The display shows the time format options available.
4. Select the desired format with the Selector Dial.
5. To enter the current time, use the Scroll (arrow) keys to switch between hours and minutes.
6. Set the correct time with the Selector Dial.
7. Confirm the setting by pressing the Smart Key.