Dell Dimension 2200 - Manual (Page 46)

46 Solving Problems
www
.dell.com | support.dell.com
4 When you see the Windows desktop, reinsert the ResourceCD into the
CD or DVD drive.
5 At the Welcome Dell System Owner screen, click Next.
HINT: The ResourceCD
displays drivers only for
hardware that Dell
installed at the time of
purchase. If you installed
any additional hardware,
those drivers may not be
displayed by the
ResourceCD. If those
drivers are not displayed,
exit the ResourceCD
program and refer to the
documentation and
drivers that came with
that product.
A message appears that says the ResourceCD is detecting hardware in
your computer.
The drivers that are used by your computer are automatically displayed
in the My Drivers—The ResourceCD has identified these
components in your system window.
6 Click the driver that you want to reinstall and follow the instructions
on the screen.
If a particular driver is not listed, then that driver is not required by
your operating system.
To view other contents on the ResourceCD:
1 Verify that your computer is selected in the System Model list.
2 Verify that your operating system is selected in the Operating System
list.
3 Select the type of device in the Device Type list.
NOTICE: The ResourceCD contains drivers for devices that are not part of
your computer. Only reinstall the specific drivers for hardware included in your
computer. Otherwise, your computer might not work correctly.
4 Select a topic in the Topic list.
If you select Drivers in the Topic list and a particular driver is not
listed, then that driver is not required by your operating system.
Using the Windows XP Device Driver Rollback
The Windows XP Device Driver Rollback can replace a device driver with
the previously installed version if you install a new device driver that causes
system instability. If you cannot reinstall your previous driver with the
Driver Rollback process, then use System Restore (see page 49) to attempt
to return your operating system to its previous operating state before the
new device driver installation:
1 Click the Start button, and then right-click My Computer.
2 Click Properties.