Dell Studio Slim D540S (Late 2008) User Manual
Page 9

See the documentation for the card for information about the card's cable connections.
11.
Replace the computer cover, reconnect the computer and devices to electrical outlets, and then turn them on.
12.
To complete the installation, see
Configuring Your Computer After Removing or Installing a PCI/PCI Express Card
Configuring Your Computer After Removing or Installing a PCI/PCI Express Card
Back to Contents Page
NOTE:
For information on location of connectors, see the Setup Guide. For information on installing drivers and software for your card, see the
documentation that shipped with the card.
Installed
Removed
Sound
Card
1.
Enter system setup (see
System Setup
).
2.
Go to Integrated
Peripherals and select
Onboard Audio
Controller, and then
change the setting to
Disabled.
3.
Connect the external
audio devices to the
sound card's connectors.
1.
Enter system setup (see
System Setup
).
2.
Go to Integrated
Peripherals and select
Onboard Audio
Controller, and then
change the setting to
Enabled.
3.
Connect the external
audio devices to the
computer's back panel
connectors.
Network
Card
1.
Enter system setup (see
System Setup
).
2.
Go to Integrated
Peripherals and select
Onboard LAN Controller,
and then change the
setting to Disabled.
3.
Connect the network
cable to the network
card's connector.
1.
Enter system setup (see
System Setup
).
2.
Go to Integrated
Peripherals and select
Onboard LAN Controller,
and then change the
setting to Enabled.
3.
Connect the network
cable to the integrated
network connector.