Dell Dimension 2010 - Manual (Page 73)

System Setup 73
Boot Device Configuration
Boot Setting Config
• Numlock Key—On; Off (On by default)
• Halt on—All, But Keyboard; All Errors(All, But Keyboard
by default)
Removable Device
Priority
Press Enter for details. This is a dynamic list and is
updated based on the removable devices connected to
your computer.
Hard Disk Boot
Priority
Set the hard drive boot priority, if multiple hard drives
are installed.
CD-ROM Boot
Priority
Set the optical drive boot priority, if multiple optical
drives are installed.
1st Boot Device
Removable; Hard Disk; CDROM; Network; Disabled
(Hard Disk by default)
2nd Boot Device
Removable; Hard Disk; CDROM; Network; Disabled
(CDROM by default)
3rd Boot Device
Removable; Hard Disk; CDROM; Network; Disabled
(Removable by default)
Power Management Features
ACPI Suspend Type
S1(POS); S3(STR) (S3(STR) by default)
Remote Wake Up
Disabled; Enabled (Enabled by default)
Auto Power On
Disabled; Enabled (Disabled by default)
Auto Power On Date
0
Auto Power On Time
0:00:00
AC Recovery
Last Power State; Power On; Power Off (Power Off by
default)
Load Defaults
Loads the factory default system setup settings.
Set Supervisor Password
Allows you to set a supervisor password of up to eight characters. The supervisor
password allows you to access your computer and to modify the system setup settings.
To disable the supervisor password, leave the Enter Password field blank and press
.
book.book Page 73 Monday, November 19, 2012 11:42 AM