Battery, Removing the battery – Dell Dimension 2010 User Manual
Page 67
Battery
67
14
Battery
WARNING:
Before working inside your computer, read the safety information
that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
WARNING:
A new battery can explode if it is incorrectly installed. Replace the
battery only with the same or equivalent type recommended by the manufacturer.
Discard used batteries according to the manufacturer’s instructions.
WARNING:
To guard against electrical shock, always unplug your computer from
the electrical outlet before removing the cover.
WARNING:
Do not operate your equipment with any cover(s) (including computer
covers, bezels, filler brackets, front-panel inserts, etc.) removed.
Removing the Battery
1 Record all the screens in system setup (see "System Setup" on page 69) so
that you can restore the correct settings after the new battery has been
installed.
2 Follow the procedures in "Before You Begin" on page 11.
3 Remove the computer cover (see "Removing the Computer Cover" on
4 Locate the battery socket (see "System Board Components" on page 8).
CAUTION:
If you pry the battery out of its socket with a blunt object, be careful
not to touch the system board with the object. Ensure that the object is inserted
between the battery and the socket before you attempt to pry out the battery.
Otherwise, you may damage the system board by prying off the socket or by
breaking circuit traces on the system board.
book.book Page 67 Monday, November 19, 2012 11:42 AM