Dell Dimension 2010 - Manual (Page 52)

52 Processor Fan and Heat Sink Assembly
5 Rotate the clamp lever 180 degrees clockwise to release the clamp grip
from the bracket projection.
6 Rotate the processor fan and heat sink assembly upward gently, and
remove it from the computer. Lay the processor fan and heat sink assembly
down on its top, with the thermal grease facing upward.
NOTE: The processor fan and heat sink assembly in your computer may not look
exactly like the one shown in the illustration above.
1 bracket 2 clamp lever
3 clamp grip 4 bracket projection
5 processor fan and heat sink assembly
3 4 2
5
1
book.book Page 52 Monday, November 19, 2012 11:42 AM