Dell Dimension 2010 - Manual (Page 29)

PCI and PCI Express Cards 29
6 Place the card in the connector and press down firmly. Ensure that the card
is fully seated in the slot.
7 Replace the screw that secures the card to the chassis
8 Connect any cables that should be attached to the card.
See the documentation for the card for information about the card’s cable
connections.
CAUTION: Do not route card cables over or behind the cards. Cables routed over
the cards can prevent the computer cover from closing properly or cause damage
to the equipment.
9 Replace the computer cover (see "Replacing the Computer Cover" on
page 16).
10 To complete the installation, see "Configuring Your Computer After
Removing or Installing a PCI/PCI Express Card" on page 30.
1 PCI Express x16 card 2 PCI Express x16 card connector
3 securing tab 4 retention mechanism
2
1
3
4
book.book Page 29 Monday, November 19, 2012 11:42 AM