Dell Inspiron 1318 (Mid 2008) - Manual (Page 21)

4. Remove the display panel.
5. Remove the six screws (three on each side) that secure the display panel brackets to the display panel.
Replacing the Display Panel
1. Align the display panel brackets with the display panel.
2. Replace the six screws that secure the display panel brackets to each side of the display panel.
3. Align the display panel with the display panel frame and replace the six screws.
4. Route the cables back through their routing channels.
5. Replace the display bezel (see Display ).
6. Replace the display assembly (see Display ).
Removing the Display Panel Cable
1 display panel 2 M 2.5 x 5 mm screws (6)
2 display panel frame
1 M2 x 3-mm screws (6) 2 display panel brackets (2)