Charger board, Removing the charger board, Replacing the charger board – Dell Inspiron 1318 (Mid 2008) User Manual
Page 12
Back to Contents Page
Charger Board
Dell™ Inspiron™ 1318 Service Manual
Removing the Charger Board
1.
Follow the procedures in
Before You Begin
.
2.
Remove the system board (see
System Board
).
3.
Remove the screw that secures the charger board to the base of the computer.
4.
Lift the charger board away from the base of the computer.
Replacing the Charger Board
1.
Align the screw hole on the charger board with the screw hole on the base of the computer.
2.
Replace the screw that secures the charger board to the base of the computer.
3.
Replace the system board (see
System Board
).
4.
Slide the battery into the battery bay, until it clicks into place.
Back to Contents Page
CAUTION:
Before performing the following procedures, follow the safety instructions shipped with your computer.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of
the computer.
1
M2 x 3-mm screw
2
charger board