Dell PERC 4/SC - Manual (Page 15)

2. At the command prompt, type:
expert noprobe dd
3. When the install prompts for a driver diskette, insert the diskette and press .
See Creating a Driver Diskette for information about creating a driver diskette.
4. Complete the installation as directed by the installation program.
Installing the Driver Using an Update RPM
Perform the following steps to install Red Hat Linux 9.0 or later and the appropriate RAID driver using an update RPM:
1. Boot normally from the Red Hat Linux installation CD.
2. Install the RPM file rpm -ivh megaraid-.rpm.
3. Reboot the system.
Back to Contents Page