Dell Studio 1749 (Early 2010) - Manual (Page 13)

1. Follow the procedures in Before You Begin .
2. Align the screw holes on the camera module with the screw holes on the display cover.
3. Replace the two screws that secure the camera module to the display cover.
4. Replace the display panel (see Replacing the Display Panel ).
5. Replace the display assembly (see Replacing the Display Assembly ).
6. Replace the media controls board (see Replacing the Media Controls Board ).
7. Replace the keyboard (see Replacing the Keyboard ).
8. Replace the center control cover (see Replacing the Center Control Cover ).
9. Connect the subwoofer assembly cable to the subwoofer assembly cable connector on the system board (see Replacing the Palm Rest ).
10. Connect the antenna cables to the Mini-Card(s) (see Replacing the Mini-Card ).
11. Replace the base cover (see Replacing the Base Cover ).
12. Replace the battery (see Replacing the Battery ).
Back to Contents Page