Cisco 10008 User Manual

Page 28

Cisco 10008 Router Performance Routing Engine 3 Installation

OL-8544-01

Analyzing and Troubleshooting Packets

For detailed information about the show pxf cpu commands, refer to the

To display packet statistics for the PRE3, enter the following commands:

Command

Purpose

Router# show running-config

Displays the current router configuration.

Router# show interfaces type slot/subslot/port

Displays information about an interface.

Router# show version

Displays information about the currently
loaded software version along with hardware
and device information.

Router# show pxf cpu access-lists

Displays PXF memory information for ACLs.

Router# show pxf cpu atom

Displays PXF Any Transport over MPLS
(AToM) forwarding information for an
interface or Virtually Cool Common Index
(VCCI).

Router# show pxf cpu bba

Displays PXF Broadband Aggregation (BBA)
groups information.

Router# show pxf cpu buffers

Displays packet buffer memory for temporary
packet storage in the Cisco Internetwork
Performance Monitor (IPM) of the PXF.

Router# show pxf cpu context

Displays the current and historical loads on
the PXF.

Router# show pxf cpu feedback

Displays the total number of feedbacks
through the PXF by all packets.

Router# show pxf cpu isg

Displays PXF policy and template
information.

Router# show pxf cpu ipv6

Displays PXF IPv6 statistics.

Router# show pxf cpu mpls

Displays PXF MPLS Forwarding Information
Base (FIB) information.

Router# show pxf cpu mroute

Displays PXF multicast route (mroute)
information for a particular group or range of
groups.

Router# show pxf cpu pbr action

Displays policy-based routing (PBR) actions
configured in the PXF.

Router# show pxf cpu police

Displays all active policer policies in the PXF,
including active interface and policing
parameters.

Router# show pxf cpu policy-data

Displays PXF policy data index usage
statistics.

Router# show pxf cpu queue

Displays queueing statistics for a single
interface, all interfaces, or a queue identifier
(QID).

Router# show pxf cpu statistics

Displays various PXF statistics for a
configured router.