Iomega zip drive disassembly, Iomega zip drive disassembly -30, Figure 4-21 – Dell Inspiron 3500 User Manual
Page 66: Rphjd=ls'ulyh'lvdvvhpeo
4-30
Dell Inspiron 3500 Portable Computer Service Manual
,RPHJD=LS'ULYH'LVDVVHPEO\
&$87,21 7KH IROORZLQJ SURFHGXUH VKRXOG EH SHUIRUPHG RQO\ E\
GHSRW UHSDLU WHFKQLFLDQV
)LJXUH ,RPHJD =LS 'ULYH 'LVDVVHPEO\
To disassemble the optional Zip drive, see Figure 4-21 and follow these steps:
1.
Remove the optional Zip drive from the options bay.
2. Remove the two 5-mm screws from the top of the drive assembly.
3. Carefully unsnap the upper plastic from the lower plastic. It is held in place
by a series of internal plastic tabs around the edge of the holder.
4. Lift the Zip drive out of the lower plastic. The metal bracket for the connec-
tor may lift out as you remove the Zip drive.
NOTE: To remove the media from the Zip drive once the power to the drive is
off, insert a small, thin object (such as one end of a paper clip) into the pinhole
in the drive’s LED. This will eject the Zip disk.
7\SH RI 6FUHZ
7RUTXH
FPH 2.5 x 5 (2)
2.5–3.0 kgf-cm
metal
bracket
5-mm screws (2)
Zip drive
lower plastic
upper plastic