Dell Inspiron 3500 - Manual (Page 58)

4-22 Dell Inspiron 3500 Portable Computer Service Manual
3DQHO5DLOVIRU,QFK'LVSOD\$VVHPEO\
&$87,21 7KH IROORZLQJ SURFHGXUH VKRXOG EH SHUIRUPHG RQO\ E\
GHSRW UHSDLU WHFKQLFLDQV
To remove the panel rails, see Figure 4-13 and follow these steps:
1. Remove the display assembly.
2. Remove the bezel.
3. Remove the LCD interior assembly.
4. Remove the LED cable from the right panel rail (optional).
NOTE: Note the routing of the LED cable through the right panel rail for
installation.
5. Place the LCD interior assembly face down on a surface that will not dam-
age the LCD.
6. Remove the two 5-mm screws securing the left panel rail.
7. Remove the left panel rail. It is stamped with an L (left) for easy
identification.
8. Remove the two 5-mm screws securing the right panel rail. Note that
these screws can be loosened so the panel rail can slide out of the slots;
the screws do not have to be completely removed
9. Remove the right panel rail. It is stamped with an R (right) for easy
identification.
During installation, the rails must fit snugly against the LCD panel so the inte-
rior assembly will fit inside the back cover.
7\SH RI 6FUHZ 7RUTXH
FLH 2.5 x 5 (4) 1.5–1.8 kgf-cm