Subscriber identity module (sim) card, Wireless cards, Wireless local area network (wlan) cards – Dell Precision M65 User Manual
Page 61

7.
Turn on the computer.
As the computer boots, it detects the additional memory and automatically updates the system configuration information.
To confirm the amount of memory installed in the computer, click the Start button, click Help and Support, and then click Computer Information.
Subscriber Identity Module (SIM) Card
1.
.
2.
Remove the battery (see
Replacing the Battery
).
3.
Slide the SIM card into the compartment with the cut-off corner of the card facing away from the compartment.
Wireless Cards
If you ordered a wireless LAN or WAN card with your computer, the card is already installed.
Wireless Local Area Network (WLAN) Cards
1.
.
2.
Remove the hinge cover (see
3.
Remove the keyboard (see
4.
Ground yourself by touching one of the metal connectors on the back of the computer.
5.
If a card is not already installed, go to
. If you are replacing a card, remove the existing card:
a.
Disconnect the antenna cable from the card.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
1 SIM card
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE:
To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.
NOTE:
If you leave the area, ground yourself again when you return to the computer.