Dell UP2414Q Monitor - Manual (Page 34)

34

Operating the Monitor
NOTE: To ensure optimal color accuracy it is not
recommended to adjust the Contrast or Brightness
settings after calibrating CAL1 and CAL2. It is
recommended to calibrate CAL1 and CAL2 to the
same desired luminance level before turning on
Zonal Color Space.
Contrast (2) Allows you to adjust the contrast on the left side
of the screen when Zonal Color Space or/and
PBP Mode is turned on.
Border Allows you to turn the blue border Off or On.
The border is to indicate the section of the screen
that may be in a different color space.
Hue This feature can shift color of video image to green
or purple. This is used to adjust the desired flesh
tone color. Use
or to adjust the hue from ‘0’
to ‘100’ .
Press to increase the green shade of the video
image.
Press
to increase the purple shade of the video
image.
NOTE: Hue adjustment is available only for Movie
and Game mode.
Saturation This feature can adjust the color saturation of the
video image. Use
or to adjust the saturation
from ‘0’ to ‘100’.
Press to increase the monochrome appearance
of the video image.
Press
to increase the colorful appearance of the
video image.
NOTE: Saturation adjustment is available only for
video input.
Reset Color
Settings Resets your monitor’s color settings to the factory
defaults.