Dell PowerEdge 2650 - Manual (Page 18)

1-14 2-Post Rack Installation
www
.dell.com | support.dell.com
6 Route the system status indicator end of the cable through the cable-management
arm, and install the indicator in its slot at the back end of the cable-management arm
(see Figure 1-8).
F i g u r e 1 - 8 . I n s t a l l i n g t h e S y s t e m S t a t u s I n d i c a t o r C a b l e
7 Connect the power cords to their receptacles on the back panel (see Figure 1-9).
system status
indicator cable plug
wire covers in
open position
system status indicator