Dell POWEREDGE C6105 - Manual (Page 51)

51
Extended Configurations
Table 1-44. Extended Configurations
Net Function = OEM (0x30), LUN = 00
All strings are in P-String format.
Attribute ID Size Description
Configuration ID = 02h, NIC
NicSelection
1 1 Specifies the current mode of operation for
the BMC Network interface.
0: Shared NIC (default)
1: Dedicated NIC
R/W
Shared
NICSelection
2 1 This parameter is only valid when Attribute
ID 1
NICSelection parameter is set to 0h as
Shared NIC.
0h: Reserved (Recommend to set to 0h
when NICSelection is set to Dedicated
NIC.)
1h: NIC-1 (default)
Note: According to DCS I/O guide line,
RJ45 connectors should be labeled starting
from NIC-1. It also requires that Dedicated
BMC NIC should always be the largest
number (last port number). Therefore this
Attribute ID parameter only requires to
support the available Shared NIC numbers
according to the labeled numbers,
regardless of the NC-SI topology (i.e.
Single Channel Dual Package or Dual
Channel Single Package). When user
attempts to set to a NIC value that is not
supported on the platform, a completion
code CCh should be returned to indicate
an invalid data.
R/W
Configuration ID = 03h, SOL