Dell Dimension 4600 - Manual (Page 57)

A d v a n c e d Tr o u b l e s h o o t i n g 57
A possible expansion card failure has
occurred. 1 Determine if a conflict exists by
removing a card and then
restarting the computer.
2 If the problem persists, reinstall
the cards that you removed,
remove a different card, and
then restart the computer.
3 Repeat this process for each
card. If the computer starts
normally, troubleshoot the last
card removed from the
computer for resource conflicts
(see "Resolving Software and
Hardware Incompatibilities" on
page 65).
4 If the problem persists, contact
Dell (see page 113).
Other failure has occurred. • Ensure that the cables are
properly connected from the
hard drive, CD drive, and DVD
drive to the system board (see
page 77).
• If the problem persists, contact
Dell (see page 113).
The computer is in a normal operating
condition after POST. None.
Light Pattern Problem Description Suggested Resolution
= y e l l o w
= g r e e n
= o f f
A B C D
A B C D
A B C D
J2936bk0.book Page 57 Tuesday, September 2, 2003 3:06 PM