Dell Dimension 4600 - Manual (Page 45)

S o l v i n g Pr o b l e m s 45
I F THE POWER LIGHT IS OFF — The computer is either turned off or is not receiving power.
• Reseat the power cable into both the power connector on the back of the computer and the
electrical outlet.
• If the computer is plugged into a power strip, ensure that the power strip is plugged into an
electrical outlet and that the power strip is turned on.
• Ensure that the electrical outlet is working by testing it with another device, such as a lamp.
• Bypass power protection devices, power strips, and power extension cables to verify that the
computer turns on.
• Ensure that the main power cable is securely connected to the system board (see page 77).
• Ensure that the front panel cable is securely connected to the system board (see page 77).
• If the problem persists, contact Dell (see page 113).
I F THE POWER LIGHT IS STEADY AMBER — The computer is receiving electrical power, but
an internal power problem might exist.
• Ensure that the microprocessor power cable is securely connected to the system board (see
page 77).
• Remove and then reinstall the memory modules (see page 95).
• Remove and then reinstall any cards (see page 78)
• If the problem persists, contact Dell (see page 113).
I F THE POWER LIGHT IS BLINKING AMBER — A device might be malfunctioning or
incorrectly installed.
• Ensure that the main power cable is securely connected to the system board (see page 77).
• If the problem persists, contact Dell (see page 113).
E LIMINATE INTER FERENCE — Electrical appliances on the same circuit or operating near the
computer can cause interference. Other causes of interference are:
• Power extension cables
• Keyboard and mouse extension cables
• Too many devices on a power strip
• Multiple power strips connected to the same electrical outlet
J2936bk0.book Page 45 Tuesday, September 2, 2003 3:06 PM