Dell Precision M20 - Manual (Page 60)

l To move the cursor, lightly slide your finger over the touch pad.
l To select an object, lightly tap once on the surface of the touch pad or use your thumb to press the left touch-pad button.
l To select and move (or drag) an object, position the cursor on the object and tap down-up-down on the touch pad. On the second down motion, leave
your finger on the touch pad and move the selected object by sliding your finger over the surface.
l To double-click an object, position the cursor on the object and tap twice on the touch pad or use your thumb to press the left touch-pad button twice.
You can also use the track stick to move the cursor. Press the track stick left, right, up, or down to change the direction of the cursor on the display. Use the
track stick and track stick buttons as you would use a mouse.
Customizing the Touch Pad and Track Stick
You can use the Mouse Properties window to disable the touch pad and track stick or adjust their settings.
1. In Windows XP, open the Control Panel , click Printers and Other Hardware, and then click Mouse.
In Windows 2000, open the Control Panel and double-click the Mouse icon.
2. In the Mouse Properties window:
l Click the Device Select tab to disable the touch pad and track stick.
l Click the Pointer tab to adjust touch pad and track stick settings.
3. Click OK to save the settings and close the window.
Changing the Track Stick Cap
You can replace your track stick cap if it wears down from prolonged use or if you prefer a different color. You can purchase additional caps by visiting the Dell
website at www.dell.com.
1. Pull the cap off the track stick.
2. Align the new cap over the square track-stick post and gently press the cap down onto the post.
3. Test the track stick to ensure that the cap is seated properly.
Back to Contents Page
1 track stick 3 touch pad
2 track stick
buttons
4 touch pad
buttons
NOTE: You may not be able to purchase additional caps from Dell in certain countries.
NOTICE: The track stick can damage the display if it is not properly seated on the post.