Dell Latitude E6420 XFR (Early 2011) - Manual (Page 17)

Dell Latitude E6420 XFR Setup and Features Information
eGalaxTouch Configuration Utility | Page 17
Setting
The Setting property page provides the following buttons and check boxes:
1 Beep
• Beep On Touch
Check this check box to enable driver to generate a beep sound when touch
touchscreen state is switched from untouched to touched state.
• Beep On Release
Check this check box to enable driver to generate a beep sound when touchscreen state
is switched from touched state to untouch state.
• Frequency
Adjust this frequency to control the beep sound frequency generated by the driver.
• Duration
Adjust this duration to control the beep sound duration.
2 Linearization Style
The eGalaxTouch utility provides you with both 9 points and 25 points calibration for
linearization. You can select the suitable kind of linearization type with this setting. The
Linearization function is accessed under the “Tools” tab.
3 Double Click Time
The double Click Time group is used to set system double click time. Changing this value
will affect the double click behavior for all of the mice devices in the system. Two continuous
clicks at the same area within this specified time period will be recognized as a double click
event.
4 Double Click Area
The double click area group is used to set the system double click area. Changing this value
will affect the double click behavior for all of the mice devices in the system. Two continuous
clicks within the specified area in the specified double click time will be recognized as a
double click event.
5 Mouse Emulation mode
There are 5 mouse emulation modes for the eGalaxTouch touch screen controllers. Press on
the button to change the emulation mode.
• Normal Mode
You can select this mode to select objects, and drag objects.
• Click On Touch
With this Click On Touch mode, the driver emulates a mouse click event when the
touch screen state is switched from un-touched state to touched state. Then, the driver
always generates a mouse move event and tracks the touch position until the touch
screen state switches to the un-touch state.
• Click On Release
With this Click On Release mode, the driver emulates a mouse click event when the
touch screen state is switched from touched state to un-touched state.