Operating the primoseal™ doors, Docking device connector door, Press-latch doors – Dell Latitude E6420 XFR (Early 2011) User Manual
Page 10: Docking device connector door press-latch doors, Connector (see “docking device
Dell Latitude E6420 XFR Setup and Features Information
Page 10 | Operating the PrimoSeal™ Doors
Operating the PrimoSeal™ Doors
Docking Device Connector Door
The docking device connector door (
) is opened by sliding the door towards the front of
the computer to its fully open position. Reverse this procedure to close the door. Be sure the
door is fully closed by sliding door until it reaches a mechanical stop.
Press-Latch Doors
There are three press-latch doors. Two on the back (power and RJ45
) and one on the
right side panel (HDMI
and eSATA
). The press-latch door is opened by:
a
Unlock the door by pushing the slide-lock to the left (the latch is locked when slid to
the right
b
Open the door by pressing down on the latch and pulling the door away from the
computer.
To close the door, rotate the door back towards the computer and press until it is in its fully
closed position. Engage the slide-lock by pushing to the right until the lock symbol is visible.
Lock