Setting https communication – Dell C3760n Color Laser Printer User Manual

Page 284

282

Using Digital Certificates

When Using the Operator Panel

1 Press the

(Menu) button.

2 Press the

button until Admin Settings is highlighted, and then press the

(Set) button.

3 Press the

button until Secure Settings is highlighted, and then press the

(Set) button.

4 Press the

button until Data Encryption is highlighted, and then press the

(Set) button.

5 Press the

button until Encryption is highlighted, and then press the

(Set) button.

6 Press the

button until On is highlighted, and then press the

(Set) button.

7 Use the number pad to enter the passphrase for the encryption key, and then press the

(Set) button.

8 The Encryption (All stored documents will be deleted. Are you sure) screen appears. When you confirm that all

stored documents will be deleted to change the encryption setting, press the

(Set) button. When you want to

quit changing the encryption setting, press the

(Back) button.

When Using the Dell™ Printer Configuration Web Tool

1 Launch Dell Printer Configuration Web Tool.

Open the web browser.

Enter the IP address of your printer in the web browser.

See "Dell™ Printer Configuration Web Tool.

2 Select Printer Settings.
3 Click the Printer Settings tab.
4 Select Secure Settings.
5 Check that the Enable check box of Panel Lock Control of Panel Lock is selected.

Enable is selected, proceed to step 10. If not, perform the following steps.

6 Select the Enable check box of Panel Lock Control of Panel Lock.
7 Enter a four digit password in New Password.
8 Re-enter the password in Re-enter Password.
9 Click Apply New Settings.

For details about Panel Lock, see "Panel Lock."

10 Click Data Encryption.

The

Data Encryption page is displayed.

11 Select the Encryption check box.
12 Enter a key that is required to encrypt.
13 Re-enter the key again to confirm it.
14 Click Apply New Settings.

Setting HTTPS Communication

Before managing certificates, set HTTPS communication with a self-signed certificate.

NOTE:

Set HTTPS communication after changing the Encryption setting to On.