Dell C3760n Color Laser Printer - Manual (Page 279)

Printing Using ColorTrack (External Authentication) 277
• Specify the time-out period for Search Time-Out.
5 Click Apply New settings.
6 Turn off the printer, and turn it on again to apply the settings.
Server Information (for ColorTrack PRO)
IP Address / Host Name & Port
Specify the IP address or the host name, and the port address. The change becomes effective after the printer is
turned off and then on again.
CAUTION: Do not use the same port address as that of another port.
NOTE: The port address must be 389, 636 or between 5,000 and 65,535. The default value is 389. When using LDAPS, normally
specify 636.
NOTE: Specify the IP address in the nnn.nnn.nnn.nnn format for IPv4. Each section of "nnn" is a variable value between 0 and
255.
NOTE: Specify the IP address in the xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx format for IPv6. Each section of "xxxx" is a
hexadecimal variable value.
LDAP Server
Displays the current software information of the LDAP server.
Optional Information (for ColorTrack PRO)
Search Directory Root
Specify a text string as the origin of the search when using LDAP communication. The change becomes effective
after the printer is turned off and then on again.
For example: ou=colortrackv3,dc=win2003ad,dc=colortrack.dc=net
Login Name
Specify the login name for accessing the directory server with LDAP authentication. Specify the name of a user with
the authority to update the LDAP server. The change becomes effective after the printer is turned off and then on
again.
Password
Specify the password for accessing the directory server with LDAP authentication. Specify the password of a user
with the authority to update the LDAP server using 1 to 127 alphanumeric characters. If the password is left blank
(NULL), you cannot log in to a server. The change becomes effective after the printer is turned off and then on
again.
Re-enter Password
Enter the password again to confirm it.
Search Time-Out
Specify the amount of time the printer should wait for searching for the server. To specify a time-out period for
searching, select Wait, and set the time period from 5 up to 120 seconds. To not specify a time-out period, select the
Wait LDAP Server Limit. The change becomes effective after the printer is turned off and then on again.