Dell XPS 700 Jet Black - Manual (Page 20)

Back to Contents Page
Removing the Computer Cover
Dell™ XPS™ 700 Service Manual
1. Follow the procedures in Before You Begin .
2. Pull back on the cover release latch.
3. With the cover release latch pulled back, grip the sides of the cover, then pivot the top of the cover up and away from the computer.
4. Slide the cover forward and up to remove it from the hinge slots, then set it aside in a secure and protected location.
Back to Contents Page
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.
NOTICE: To avoid electrostatic discharge and damage to internal components, ground yourself by using a wrist grounding strap or by periodically
touching an unpainted metal surface on the computer chassis.
NOTICE: Ensure that sufficient space exists to support the removed cover—at least 30 cm (1 ft) of desk top space.
1 computer cover 2 cover release latch 3 cover hinge tabs
4 stabilizing feet (closed)