Palm-rest assembly, Removing the palm-rest assembly, 5 remove the ten screws from the computer base – Dell Inspiron 14 (N4120, Early 2011) User Manual
Page 31
Palm-Rest Assembly
31
8
Palm-Rest Assembly
WARNING:
Before working inside your computer, read the safety information
that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your
computer. Damage due to servicing that is not authorized by Dell is not covered by
your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on your computer).
CAUTION:
To help prevent damage to the system board, remove the main battery
(see "Removing the Battery" on page 15) before working inside the computer.
Removing the Palm-Rest Assembly
1 Follow the instructions in "Before You Begin" on page 9.
2 Remove the battery (see "Removing the Battery" on page 15).
3 Remove the module cover (see "Removing the Module Cover" on
4 Follow the instructions from step 4 to step 5 in "Removing the Optical
5 Remove the ten screws from the computer base.
6 Remove the keyboard (see "Removing the Keyboard" on page 27).