Dell DL4000 User Manual

Page 10

Text mode
Original mode

Document Classification (for non-Titus systems) | DL4XXX - Fibre Channel Implementation | Document numbers,
revision numbers, and other document identifiers can be placed in the footer.

4. Add the 4 newly created zones into a Brocade zone configuration and enable it.

Select the Zone Config tab.

ii.

Select New Zone Config and enter a zone configuration name. ‘DL_MD3000config’ was used
in this example.

iii.

Highlight the four zones created in step-3, then press the arrow key to add them in the Zone
Config Members list.

iv.

Save the new zone configuration by selecting Save Config.

Enable the zone configuration by selecting Enable Config.

5. Repeat steps 1 - 4 outlined in Section-4b to create and enable the four zones on the alternate fibre

channel switch.