Osd warning messages – Dell 2408WFP Monitor User Manual

Page 26

OSD Warning Messages

PIP Position

Brightness

PIP/PBP Contrast

PIP/PBP Hue/Tint

PIP/PBP Saturation

Exit Menu

Select PIP window position.

Use

and

to browse and

to select.

Adjust the brightness level of the picture in PIP/PBP Mode.

reduce the brightness

increases the brightness

Adjust the contrast level of the picture in PIP/PBP Mode.

reduce the contrast

increases the contrast

This function shifts the color of PIP/PBP image to green or purple. This is used to adjust for desired flesh tone color.

shifts image color towards green

shifts image color towards purple

Adjust the color saturation of PIP/PBP image.

makes the image look more monochrome

makes the image look more colorful

Push

to exit the OSD main menu.

When the monitor does not support a particular resolution mode you will see the following
message :

This means that the monitor cannot synchronize with the signal that it is receiving from the
computer. See

Monitor Specifications

for the Horizontal and Vertical frequency ranges addressable

by this monitor. Recommended mode is 1920 X 1200.

When monitor enters Power Save mode, the following message appears :

Activate the computer and wake up the monitor to gain access to the

OSD

If you press any button other than the power button one of the following messages will appear depending on the selected input:

VGA/DVI-D input

Video Input

In PIP mode, when the monitor does not sense the selected second signal input, one of the following messages will appear depending upon the selected input
as long as the OSD screen is closed.
1. VGA

2. DVI-D 1

3. DVI-D 2

4. HDMI

5. DisplayPort

6. S-Video

7. Composite

8. Component