Dell 2408WFP Monitor User Manual
Page 24
Display Info
Display Reset
Exit Menu
All the settings related to this monitor.
Reset the image to the original factory setting.
Push
to exit the OSD main menu.
OTHER
SETTINGS
Back
Language
Menu Transparency
Menu Timer
Menu Lock
Menu Rotation
Audio Option
DDC/CI
Push
to go back to the main menu.
Language option to set the OSD display to one of five languages (English, Espanol, Francais, Deutsch, Japanese).
This function is used to adjust the OSD background from opaque to transparent.
OSD Hold Time: Sets the length of time the OSD will remain active after the last time you pressed a button.
Use the
and
buttons to adjust the slider in 5 second increments, from 5 to 60 seconds.
Controls user access to adjustments. When 'Yes' (+) is selected, no user adjustments are allowed. All buttons are locked except the menu
NOTE:
When the OSD is locked, pressing the menu button will take the user directly to the OSD settings menu, with 'OSD Lock' pre
Select No(-) to unlock and allow user access to all applicable settings.
Rotates the OSD by 90 degrees counter-
To turn on or off Audio Power during Power Save mode.
DDC/CI (Display Data Channel/Command Interface) allows your monitor parameters (brightness, color balance etc) to be adjustable via software on your PC.
You can disable this feature by selecting "Disable".
Enable this feature for best user experience and optimum performance of your monitor.
If an image appears to be stuck on the monitor, select LCD Conditioning to help eliminate any image retention. Using the LCD Conditioning feature may take
several hours. Severe cases of image retention are known as burn-in, the LCD Conditioning feature does not remove burn-