Dell 2408WFP Monitor - Manual (Page 23)

Saturation
Exit Menu
100.
makes video image shade into greenish
makes video image shade into purplish
NOTE: Hue adjustment only available for video input.
This feature can make color shift of video image to green or purple. This is used to adjust for desired flesh tone color. Use -
'100'.
makes video image looks more monochrome
makes video image looks more colorful
Push to exit the OSD main menu.
DISPLAY
SETTINGS
Back
Wide Mode
Horizontal Position
Vertical Position
Sharpness
Zoom
Horizontal Pan
Vertical Pan
Pixel Clock
Phase
Dynamic Contrast
Push to go back to the main menu.
Adjust the image ratio as 1:1, aspect or full screen.
NOTE: Wide Mode adjustment is not required at optimal preset resolution 1920 x 1200.
Use the and buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+).
Use the and buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+).
This feature can make the image look sharper or softer. Use or to adjust the sharpness from '0' to '100' .
Use the Zoom function to zoom in to specific area of interest.
Using the and keys to zoom in and out.
After zooming in, the horizontal and vertical pan function allows you to pan the enlarged image left/right and up/down respectively.
Use the and buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+).
Use the and buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+).
T he Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference. These settings are accessed through the main OSD menu, by
selecting 'Image Settings'.
Use the and buttons to adjust for best image quality.
If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase (fine), again.
NOTE: Pixel Clock and Phase Adjustments are only available for "VGA" input.
Dynamic contrast allows you to increase the level of contrast to provide sharper and more detailed image quality.