Dell PowerVault NX1950 - Manual (Page 26)

26 Deployment Guide
16 In the Log On window, type your administrator password, and click OK.
The operating system installation continues.
NOTE: The installation procedure may take several minutes to complete.
17 When the installation is completed, the system automatically reboots.
18 When prompted, log on as Administrator.
The Windows Storage Server script starts, and requires no user intervention.
19 After the script executes the system is locked. Unlock the system, log off
and then log on as administrator.
NOTE: After you unlock the system or you log off and log on, the Windows
Storage Server 2003 splash screen is displayed.
20 The Windows Unified Data Storage Server 2003 x64 components are
installed and configured, and the installation procedure is complete.
NOTE: It is recommended that you download and install any patches, hotfixes, and
Service Pack 2 (SP2) from the Microsoft Support website at support.microsoft.com.
Install hotfixes after you install SP2.
NOTE: If the iSCSI 3.1 Active/Active Target is not on the operating system media, go
to the Dell Support website at support.dell.com to download and install it.
Restoring the Dell Storage Array Components
This section provides information about reinstalling the Dell storage array
components. Table 1-4 provides the Dell recommended order for installing
the Dell storage array components for the integrated solution.
Table 1-4. PowerVault NX1950 Storage Solution With PowerVault MD3000 Storage
Arrays (Integrated Solution )
Component Minimum Version
Information Location
1 SAS 5/E adapter driver v.1.24.04.00 support.dell.com
2 StorPort hotfix KB940467 support.microsoft.com
3 Kernel fix for PowerNow KB924441 support.microsoft.com
4 2 TB GPT hotfix KB919117 support.microsoft.com
5 SIS hotfix KB932198 support.microsoft.com